Architectural Shingles
The most common residential roof today. Thicker and more dimensional than old three-tab shingles, with better wind ratings and a longer service life. Easy to repair and widely available.
Leaking now, or just worried about an old roof? One call to +1-833-818-0925 connects you with an independent licensed and insured roofing contractor in Minneapolis. A live dispatcher answers every call, around the clock.

When a roof starts leaking in Minneapolis, people usually try a few roofers first. Half don't answer, and the other half are booked for weeks. That's exactly where we come in. We answer, sort out your roof type and the problem, and route you to an independent Minneapolis roofer with availability.
Local really does matter on a roof. A contractor who works in Minneapolis every week knows how the local permit office handles roof jobs, which neighborhoods have older multi-layer roofs, and which streets get hammered by wind when storms come through. That knowledge leads to better quotes and fewer surprises on tear-off day.
Plenty of Minneapolis calls aren't emergencies. Callers often want a remaining-life opinion, a quick fix on a rental, or a second opinion on a high-pressure quote. Those calls get the same careful routing as an active leak.
First, the honest part: Metal Roofing in Bucks doesn't own ladders, nail guns, or a single bundle of shingles. We run a free referral line. When you call +1-833-818-0925, a dispatcher listens to what is happening with your roof, asks the questions a seasoned roofer would ask, and routes your call to an independent, licensed and insured roofing contractor who works in Minneapolis. The contractor quotes the job, does the work, and stands behind it under their own written terms.
So why call a referral line instead of a company off a yard sign? Because the hardest part of a roof problem is usually the first hour. You need to know who actually answers at nine at night, who works on standing seam metal instead of only asphalt, who will climb a low-slope commercial roof with a rooftop unit on it, and who handles small repairs instead of chasing only full replacements. Sorting that out by yourself means a dozen phone calls and a lot of voicemail. Our job is to shorten that to one call.
This is roughly how the call goes. The dispatcher will ask about your roof type and approximate age, whether water is coming inside right now, whether a storm or a falling limb is involved, whether you have opened an insurance claim, and how a contractor can reach the roof safely. Those few details decide which specialist gets routed, which saves you from a wasted first visit. The referral itself costs you nothing.
In the interest of full transparency, here is how this service is funded. Calling is free for homeowners and businesses because independent contractors in our network may pay Metal Roofing in Bucks a fee for referrals. You remain free to collect other quotes, push back on a scope, or decline the work entirely.

A roof leak and a roof replacement are different jobs, often handled by different crews. The independent contractors we route calls to cover the full range below, and the dispatcher's job is to send each call to the pro whose daily work matches your roof. Here is what that work actually involves.
If you're not sure which category your problem falls into, that's normal and it's what the dispatcher is for. Just describe what you see on the ceiling, in the attic, or on the roof, and we'll route it.
An active leak is a different kind of call. The goal is to stop the water first and talk about permanent fixes after. Emergency calls get routed to contractors who keep reinforced poly tarps, 2x4 battens, cap nails, and roofing cement on the truck. A proper emergency tarp is not a sheet tossed over the ridge with bricks on top. It is stretched past the damaged area, wrapped around battens, and fastened so wind can't get underneath and peel it back. If a branch went through the deck, the broken plywood usually has to be cut back to solid framing before a temporary cover will hold.
Indoors, keep it simple: kill power to wet fixtures, clear the room, and catch the water. If a ceiling is bulging with trapped water, stay out from under it. Photograph everything before cleanup starts; adjusters want to see the damage as it was found. Most homeowner policies expect you to take reasonable steps to prevent further damage, and a documented temporary repair is usually part of that.
One more thing about emergencies: a tarp is a bridge, not a fix. UV breaks poly tarps down within a few months, and wind works at every fastener. Schedule the permanent repair once the adjuster has visited; a tarp that stays up too long can end up letting water into the very decking it was protecting.
Most roofs that leak do not need to be replaced. The most common repair calls we hear about come down to a handful of parts: cracked rubber collars on plumbing vent boots, loose or rusted step flashing where a roof meets a sidewall, nail pops that have pushed up through a shingle, wind-lifted tabs whose sealant strip has let go, and worn ridge cap. Each of those is a small, specific fix when it is caught early.
A good repair contractor will also tell you when a patch is the wrong answer. If shingles are brittle enough to crack when lifted, if granules are washing into the gutters by the handful, or if the same slope keeps leaking in new places, the conversation shifts. Shingle matching is another real issue. Discontinued colors and older three-tab profiles can be hard to blend, so ask the contractor how close the match will be before work starts. Expect a written scope that names the exact components being replaced.
Flashing deserves its own mention because it causes so many leaks. Chimneys need step flashing tied into the shingles plus counterflashing cut into the mortar joints, and wide chimneys need a cricket on the uphill side to split the water. With skylights, the leak is usually at the curb flashing, not the glass itself. A repair that only smears roofing cement over these spots tends to fail again within a season or two, so ask how the flashing will actually be rebuilt.

A replacement is the biggest roofing decision most owners ever make, so the details deserve attention. On a full tear-off, the contractor strips the old roofing to the deck, then checks the sheathing for soft spots, delamination, and rot. Bad decking gets replaced before anything else goes down. After that comes drip edge, ice and water shield at eaves and valleys where code or climate calls for it, synthetic underlayment, starter course, the field shingles or panels, and finally ridge vents and flashing.
Ventilation is where a lot of new roofs quietly fail. Intake at the soffits and exhaust at the ridge need to be balanced, or heat and moisture build up in the attic and shorten the life of the new roof. Ask every bidder how they plan to vent the attic and whether they will pull a permit and schedule the final inspection. New construction, additions, and garage roofs follow the same rules, with extra care at tie-ins where a new roof plane meets an old one. A clean job ends with a magnetic sweep of the yard and driveway for stray nails.
Two replacement quotes can differ by thousands for reasons buried in the fine print. Look for how many layers are being removed, the price per sheet for any decking replacement, the brand and type of underlayment, whether ice and water shield is included and where, how the ventilation will be handled, and whether drip edge and pipe boots are new or reused. A low bid that reuses worn flashing or leaves out ice barrier often costs more in the long run.
Metal is its own trade within roofing, and it pays to reach someone who installs it routinely. Standing seam systems hide their fasteners and use clips that let the panels expand and contract with temperature. Exposed-fastener panels, the ribbed style common on barns, shops, and many homes, are screwed straight through the face, and each screw relies on a rubber washer to stay watertight. Over time the washers harden and split, and thermal movement slowly backs the screws out.
Many metal roof leaks are fixed by replacing worn screws with slightly oversized ones and new washers, resealing laps, and replacing tired closure strips at the ridge and eaves. For new metal roofs, the contractor will talk through panel profile, gauge, and finish, and whether snow guards make sense over doors and walkways. If you are thinking about metal over an existing shingle roof, ask how they will handle the substrate and ventilation.
Rain noise is the question everyone asks about metal. Over solid decking with underlayment and attic insulation, it is usually no louder than shingles. Metal over open purlins on a barn is a different story, and that is the sound most people remember. Metal also weighs less than most other roofing, sheds snow well when installed with the right details, and lasts for decades with basic upkeep.

Flat and low-slope roofs on stores, offices, warehouses, churches, and apartment buildings are a separate specialty. The common systems are TPO and PVC single-ply membranes with heat-welded seams, EPDM rubber, modified bitumen, and older built-up roofs. Most leaks on these roofs start at the edges and penetrations: rooftop unit curbs, pipe supports, drains, scuppers, and parapet wall flashings.
Standing water that lingers for days after a rain is a warning, not a cosmetic issue. It points to clogged drains, sagging deck, or insulation that has compressed. Commercial contractors may take core cuts or use an infrared moisture survey to map wet insulation under the membrane, which tells you whether a repair, a restoration coating, or a re-roof is the smart spend. For businesses that can't close, many contractors will schedule noisy work after hours or on weekends.
Restoration coatings have changed the math on a lot of commercial roofs. When the existing roof is largely dry, a silicone or acrylic restoration over repaired seams can extend its life considerably for much less than replacement. If moisture surveys show widespread wet insulation, though, coating over it just traps the problem. A good contractor will show you the moisture data before recommending either route.
After hail or high wind, the damage is not always visible from the ground. Hail can bruise shingles and fracture the mat underneath while leaving the surface looking fine at a glance, and wind can break the seal on tabs without tearing them off. An experienced pro checks dents in gutters and vent caps first, then examines test squares on each roof slope. That documentation helps when you meet your insurance adjuster. Be wary of anyone who offers to cover your deductible; in many places that is illegal.
Plenty of inspection calls have nothing to do with weather. Home buyers, sellers, and owners who received a letter from their insurer about roof condition all call for inspections. A thorough one covers the roof surface, flashing, ventilation, and the attic side, where daylight through the decking or dark stains on rafters tell their own story. Simple upkeep, like clean gutters, resealed flashing, and trimmed branches, stretches the life of almost any roof.
A simple routine catches most problems early. Look at the roof from the ground each spring and fall, and after any major storm. Check for missing or lifted shingles, dark streaks, sagging lines along the ridge, and granules piling up at downspout outlets. Inside, a flashlight sweep of the attic after a hard rain tells you more than almost any other check. If anything looks off, call for a professional look before the next storm season.
A quick guide to the most common roofing materials and what each one is good for.
The most common residential roof today. Thicker and more dimensional than old three-tab shingles, with better wind ratings and a longer service life. Easy to repair and widely available.
Flat, single-layer shingles found on many older homes. Many are now past their prime, and finding an exact color match for repairs can be difficult. Usually a signal that replacement planning should start soon.
Concealed-fastener metal panels with raised seams. Lasts for decades, sheds snow, and avoids exposed screws entirely. Higher upfront cost than shingles.
Ribbed panels screwed directly through the face, common on barns, shops, and budget-minded homes. Affordable and durable, but the screws and washers need periodic attention.
Heavy, long-lasting tiles common in warm and coastal climates. The tile itself can last for generations; it is usually the underlayment underneath that wears out. Walking on tile takes care and experience.
The standard systems for commercial and low-slope roofs. TPO is heat-welded, EPDM is a rubber membrane, and mod bit is installed in layers. Each has its own repair methods.
Five steps, start to finish. You stay in control of every decision.
Once the call is routed, expect the contractor to reach out directly to set a time. No call back within the window you were given? Ring the line again and we'll chase it or find another pro. Nothing obligates you to hire the contractor; the decision is always yours.
Call +1-833-818-0925 day or night and a real person answers, with no forms and no call-back queue.
A few quick questions about the roof, the damage, and any insurance claim help us route the call correctly.
We connect you with an independent local roofer whose work matches your roof and your problem.
The contractor inspects the roof, explains what they found, and gives you a written price before work begins.
Once you approve, the contractor completes the work, cleans up, and walks you through what was done.
On the first visit, a thorough contractor typically checks:
A referral line is only worth calling if it makes the next hour easier. Here is what you can count on from us, and what is up to the contractor.
Some things are within our control, like answering fast and routing well. The work itself is the contractor's, and we say so plainly.
The contractors in our network quote in writing before work starts, so there are no surprise line items after the shingles come off. If a quote is vague, ask for the scope to be itemized.
Our dispatch line answers around the clock, including weekends and holidays. How quickly a contractor arrives depends on weather, demand, and distance, and the dispatcher will be straight with you about what to expect.
We route calls to contractors who work around Minneapolis, who know the local permit office, the inspection schedule, and how roofs in the area tend to age.
Calls are routed to independent licensed and insured contractors. Before work starts, ask for a certificate of insurance and confirm any required license with your local or state agency.
A shingle crew and a TPO crew are not interchangeable. The dispatcher's whole job is matching your roof type and problem to the right kind of pro.
Not happy with the first connection? Call again and we'll work to route you to another local contractor. The referral is always free.
We route calls to contractors who do repairs as well as replacements, so a fixable roof isn't automatically turned into a full re-roof pitch. Doubt a replacement recommendation? Call back and ask for a second look.
Residential calls go to residential roofers, and commercial calls go to contractors who work on low-slope membranes, coatings, and rooftop equipment. That way the first visit is useful.

Before you sign anything with any roofer, run through this list. Watch for red flags too: pressure to sign the same day, a large cash deposit before materials arrive, an offer to cover your insurance deductible, or a contractor who won't put the scope in writing.
A few typical situations, and how a referral call helps sort them out.

A storm drops a limb through the garage roof just before midnight. The dispatcher flags it as active damage and routes it to a contractor with emergency tarping gear, who covers the opening that night and comes back to quote the decking and shingle repair once the insurer has seen it.
The roof is only twelve years old, so the owner suspects bad shingles. The contractor finds the real cause at a sidewall where step flashing was never tucked behind the siding. The fix is a focused flashing repair, not a new roof.
Strangers start knocking after a hailstorm. The owner calls us, connects with a local pro, and goes into the adjuster meeting with real documentation instead of a stranger's word. The claim moves forward on photos, measurements, and test squares.
With closing around the corner, a vague inspection note threatens the deal. A roofer's itemized report with photos turns it into two clear repairs that get done before closing. The buyer gets the paperwork, and the sale stays on schedule.
A small restaurant has a drip near the hood vent every time it rains. The commercial contractor finds a clogged drain causing ponding and a split seam at the rooftop unit curb, then schedules the repair before opening hours.
An older exposed-fastener roof drips from many screw holes. A metal specialist swaps the fasteners and reseals the laps instead of replacing panels. The roof stays in service for years, and the owner spends a fraction of what new metal would cost.
These are composite examples of the kinds of calls we route, written to show how the process works. They are not individual customer reviews.
For active leaks, many Minneapolis callers get a contractor out the same day or first thing the next morning. It depends on weather and demand, and you'll hear an honest estimate before you hang up. After a major storm, expect longer waits while contractors work through calls.
The contractor you're connected with works in the Minneapolis area regularly. If the closest available roofer for your roof type is based in a neighboring town, the dispatcher will tell you.
The big factors are roof size, pitch, number of existing layers, decking condition, material choice, and access. Local permit and dumpster costs also factor in. The independent contractor will give you a written quote after seeing the roof.
For an exterior check, often no. If water is coming inside, plan to be home so the contractor can check the attic and the stain. It helps to be there anyway so you can go over the findings together.
We don't price jobs ourselves; the independent contractor does. A good quote lists materials, any per-sheet decking charge, permit costs, and cleanup. The referral itself never costs you anything.
Emergency calls cover active leaks, storm damage, fallen trees and limbs, missing shingles or panels after wind, and temporary dry-in when a permanent fix can't happen right away. The contractor will usually tarp or seal the area first, document the damage, and quote the permanent repair once it is safe and dry. If there is sparking, a sagging ceiling, or structural collapse, call 911 first.
Our network is made up of independent licensed and insured contractors. Because requirements vary by location, ask for proof of license and insurance and confirm it with the issuing agency. That check takes five minutes and is worth it.
Plenty of roofers will photograph the damage, measure the roof, and attend the adjuster inspection with you. The claim itself is between you and your insurer. Read your policy for deductible and depreciation terms, and be cautious of anyone offering to cover your deductible.
It mostly comes down to roof age, shingle condition, and whether the problem is isolated. One failed pipe boot on a ten-year-old roof is a repair. Brittle, curling shingles, heavy granule loss, and leaks in several places on an older roof usually point to replacement. Ask the contractor to show you photos of what they found either way.
Most single-family asphalt roofs are torn off and replaced in one to three days, depending on size, pitch, layers, and weather. Metal, tile, and commercial jobs run longer. The contractor will usually schedule around the forecast, and decking surprises can add a day.
We route roofing calls from every neighborhood in Minneapolis, plus the surrounding suburbs and towns. Older neighborhoods, newer subdivisions, townhome rows, and commercial corridors all get covered.
Roofs around Minneapolis vary a lot block to block. Older houses may have layered roofs and plank decking with gaps that need new sheathing before modern shingles go on. Newer homes often have architectural shingles nearing their first replacement, sometimes with ventilation that was undersized from day one. Townhome rows bring shared-wall flashing questions, and commercial buildings usually have low-slope membranes. Your call goes to someone who works on your type of roof every week.
Working in Minneapolis has its own practical details. Tight driveways and street parking affect where a dumpster can sit, some neighborhoods have HOA rules on shingle colors and work hours, and older homes close to the property line need care to protect landscaping and the house next door. A local contractor builds those details into the plan from the start.
Timing your call can help. After a big storm rolls through Minneapolis, every roofer in town gets busy at once, and the dispatcher will tell you honestly what wait to expect. For non-urgent work, booking outside storm season usually means a shorter wait.
The zip codes and nearby cities we serve are listed below, or call +1-833-818-0925 and we'll take it from there.

Call +1-833-818-0925 any hour and get connected with a licensed, insured independent roofer who works in Minneapolis. The referral is free.